Ladder Accessories
SCAFFOLD SET
SAFECLIMB BAKER STYLE 6 FT
24-40" DRYWALL STILTS
Protective covers help prevent damage to support surfaces. Especially designed to snap over extension ladder rail end caps. Resists paints, stains, thinners, and solvents. Use on all Werner single and extension fiberglass and aluminum ladders. 1 pair of covers per package.
For use on all Werner ladders. Doubles stability of extension ladder. Stand-off feature holds ladder 10" away from building to permit working behind ladder all the way to top. Spans windows 44" wide. Permits painting trim or cleaning windows without moving ladder. No tools are required for assembly. This 1 pre-assembled unit clicks on and off in seconds. Features nonmarring rubber end caps to protect the work surface.
BUILDMAN DRYWALL CART
This MetalTech outrigger set is designed to provide extra stability for rolling scaffolds. Includes four 5" double lock casters and eight locking pins. Easy assembly; meets OSHA (Occupational Safety and Health Administration) & CSA (Canadian Standards Association) requirements. Set of 4. Includes (4) outriggers (4) 5" double lock casters (8) locking pins.
MetalTech designed this rugged steel guardrail set to provide extra safety for scaffold systems. The guardrail set features a yellow poly powder-coat finish and meets OSHA requirements. Yellow poly powder-coat finish. Use with MetalTech Multipurpose Maxi Square Baker-style scaffolding.
This MetalTech multipurpose maxi square Baker-style rolling scaffold features rugged 1-1/2 In. square tube steel construction with a yellow poly powder coat finish, 5 In. double locking casters and a spring-loaded locking mechanism. Steel reinforced plywood platform adjusts from 27 In. to 71 In. in 2 In. increments. Includes: (2) 29 In. x 72 In. ladder end frames, (2) adjustable height side rails, (1) steel reinforced edge plywood platform, (4) double locking casters, and (4) caster locking pins.
18-30" DRYWALL STILTS
4-IN-1 SCAFFOLD BENCH
Caster lock pin is used to lock scaffolding and accessories together, and lock a 5 In. caster in place. Durable steel construction with zinc-plated finish for extra protection. Corrosion resistant to withstand outdoor use.
The MetalTech 5 In. Caster with Lock offers a heavy-duty, double-locking caster wheel. It comes with a locking pin to secure the caster to the frame leg and to the outrigger. Designed to prevent damage to floor surfaces, the smooth rolling caster is non-marking and easily roll over extension cords for safe, convenient use around the jobsite. The Stem hole diameter is 0.047 In., stem distance from caster is 2-1/2 In. and stem height is 4 In. Meets ANSI, OSHA and CSA standards for safety.
Keep your work area organized and clutter free with the Jobsite Series Baker Tool shelf. The tray can be installed easily on any Baker style scaffolds and can hold up to 50 lb. Includes paint can size depressed areas for quarts, gallon or 5 gallon pails and large cup and depressed area with easy grab rounded corners. It can be installed facing inside or outside.
MetalTech "Contractor Series" 32" Outrigger for Mason frames Model: M-MO32 Blue Anti-Slip Baked On Powder Coated Textured Finish. Attached to frame with 2 bolt-on clamps. Meets OSHA Requirements. Use with any standard or arched scaffold frames. Outriggers are used to widen the base of a scaffold structure for more stability and to permit increased height.
The 4' MetalTech mini folding steel work platform is a perfect solution for all your indoor painting and do it yourself projects. It features a 500 lbs. load capacity, is lightweight, easy to transport and handle. It folds down to only 3" in depth making it easy and convenient to store. It contains two sets of black anti slip platforms for a multi-level working area. Rugged 1-1/4" steel tube frame construction is secure and safe with 4" swivel casters with locking brakes and solid steel stem. The convenient tool shelf is designed to hold all your tools, screwdriver bits, both quart and gallon paint cans. It has a paper towel or trash holder and will fold out of the way when your project is completed.
The replacement stainless steel spring clip is used with the MetalTech coupling pin to lock into the top tube of both standard and arch scaffold frames. Spring steel nipple design for easy installation. Made out of stainless steel for maximum corrosion resistance.
This MetalTech pig tail locking device is an essential item for stacking scaffolding frames and attaching casters. This rugged locking device is safe and secure and features sturdy steel construction.
This Metaltech scaffold locking arm is a locking device used for applications where stacking frames is involved. The locking arm is extremely safe and solid.
This MetalTech coupling pin and spring and designed for use with stacking scaffold frames. The pin is 1-3/8" D x 9" H with a 1-5/8" D collar and rugged all-metal construction. Coupling pin and spring lock.
MetalTech offers this durable heavy-duty caster that is designed to work with its scaffolding systems. The caster features double locking wheels and rugged construction including a cast iron hub with grease fitting adapter. For use on concrete floors.
The MetalTech adjustable leveling jack is ideal for ensuring a solid foundation for scaffolding frames and can be used with standard or arched frames. Meets OSHA (Occupational Safety and Health Administration) & CSA (Canadian Standards Association) requirements. 24" galvanized screw jack with socket (hollow). Adjusts over a 16" range. Jacks are especially recommended when scaffolding is assembled along an external wall.
This MetalTech scaffold platform section is built with a rugged plywood deck and an aluminum protective edge. It includes slide locks on each end and is designed to work with standard or arched frames. Capacity of 75 lb/sq ft. Meets OSHA (Occupational Safety and Health Administration) & CSA (Canadian Standards Association) requirements.
The MetalTech Scaffolding Cross Brace for Frames. Designed for outdoor use. Easy to install on each leg of any scaffold. 1 In. O.D. galvanized steel tube.16 gauge.
MetalTech offers this Mason Scaffold frame section that features rugged and secure steel frame construction with 13 ga (gauge), 1-5/8" O.D. (outside diameter) tubes. Assembled frame capacity is 4960 lb (pound) and all frame sections meet OSHA (Occupational Safety and Health Administration) & CSA (Canadian Standards Association) requirements. Color Blue. 60" W X 60" H. Finish type Thermosetting polyester. Hardware Type Standard frame. Material Type I 11/16 steel tube. The perimeter tubes are 1-11/16", 13 ga steel. The interior tubes being 1", 16 ga steel blue antislip textured powder coat finish, 4' pin spacing. Includes coupling pins and spring-locks.
Securely holds a roller frame, paint brush, scraper and more (maximum diameter 1-3/8 In.). Locks in 9 positions, fully adjustable for virtually any angle, range of 160 degrees. Durable fiberglass-reinforced nylon and polypropylene construction. For use with threaded or sherlock GT extension poles.
The galvanized guard rail is used with MetalTech guardrail posts Model No. M-MGPUSL (SKU 770263) for safety and security on exterior scaffolding structures. A minimum of (2) guardrails (upper and midrail) must be installed on each side of the scaffold. Guardrails must be installed along the perimeter of all scaffold structures of a height of 10 ft. or more to prevent accidental falls.
The galvanized guard rail is used with MetalTech guardrail posts Model No. M-MGPUSL (SKU 770263) for safety and security on exterior scaffolding structures. A minimum of (2) guardrails (upper and midrail) must be installed on each side of the scaffold. Guardrails must be installed along the perimeter of all scaffold structures of a height of 10 ft. or more to prevent accidental falls.
MetalTech guard rail post with support is built with a rugged steel tube construction. This item is sold individually but 4 posts are required for each scaffolding set. Convenient wedge clamp on the support is easy to install by locking onto the attached scaffold frame. Guardrails Model Nos. M-MGR5 (SKU 770606) or M-MGR7 (SKU 770613) are not included must be installed along the perimeter of all scaffold structures of a height of 10 ft. or more to prevent accidental falls.
